Kobelco SK200-10 · Main Control Piping · 37 part numbers
No illustration for this section
The Main Control Piping is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
37 separately orderable part numbers make up the Main Control Piping on the Kobelco SK200-10. Where the drawing shows a callout, the Ref. column in the table carries the same number. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN06H00153F1 | CONTROL LINES | ||
| 1 | 2420R349D030 | HOSE | 1 |
| 2 | 2420R349D044 | HOSE | 1 |
| 3 | 2420R349D125 | HOSE | 1 |
| 4 | 2420R537D098 | HOSE | 1 |
| 5 | HX33L04036DY | HOSE | 1 |
| 6 | HX33L06044DX | HOSE | 1 |
| 7 | HX33L06056DX | HOSE | 1 |
| 8 | YN21V00024F2 | VALVE, CHECK | 1 |
| 8 5 - | ZD12P01400 | O RING - | 1 |
| 9 | YN21V00005F2 | VALVE, CHECK | 1 |
| 10 | YN21V00024F1 | VALVE, CHECK | 1 |
| 11 | 2444Z2525 | CONNECTOR | 1 |
| 13 | 2444Z3541 | CONNECTOR | 1 |
| 14 | HH25R06006G1 | CONNECTOR | 2 |
| 15 | YN06H01006P1 | CONNECTOR | 1 |
| 16 | ZH22X04006 | CONNECTOR | 2 |
| 17 | ZH22X06000 | CONNECTOR | 5 |
| 18 | YT42H01128P1 | ELBOW | 1 |
| 19 | 2444Z2894 | ELBOW | 2 |
| 20 | ZH32X04000 | ELBOW, 90 | 10 |
| 21 | ZH32X04006 | ELBOW | 2 |
| 22 | ZH32X06000 | ELBOW, 90 | 4 |
| 23 | ZH42X04000 | ELBOW, 45 | 1 |
| 24 | ZH42X06000 | ELBOW | 3 |
| 25 | 2444T2533 | TEE | 4 |
| 26 | 2444Z3421 | TEE | 1 |
| 27 | HH55Q06006G1 | TEE | 4 |
| 28 | HH55V06006G3 | TEE | 1 |
| 29 | ZH52X04000 | TEE | 1 |
| 30 | LC52S00019P1 | SENSOR, PRESS | 4 |
| 30 2 - | ZD12P01100 | O RING - | 1 |
| 30 | YN52S00102P1 | SENSOR, PRESS | 4 |
| 30 | YN52S00214P1 | SENSOR, PRESS | 4 |
| 31 | PY01P01043D5 | CLIP | 1 |
| 32 | YN06H01012P1 | CONNECTOR | 1 |
| 33 | ZE72X06000 | PLUG | 2 |
Factory part numbers as fitted to the Kobelco SK200-10 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 37 part numbers spread across 19 number series (2420R, 2444Z, YN06H being the biggest) In practice that means repeated items such as hose, connector, elbow and 2 hardware positions.
Where to start in this table: ZH32X04000 (elbow, 90, ×10 per assembly); ZH22X06000 (connector, ×5 per assembly); ZH32X06000 (elbow, 90, ×4 per assembly). The full list follows below.
Controls wear with use: levers develop play, linkages tighten up, and pilot circuits drift. Because each component in this group carries its own part number, worn positions can be replaced individually and the machine keeps its original feel.
Pilot and control-line items in this group carry hydraulic pressure, so their seals are service items rather than lifetime parts. Including fresh seals with any linkage order avoids a second stoppage later.
Always — genuine via original supply channels or quality OEM alternative, stated on the quotation for every line. In this group, ZH32X04000 is the number most often quoted for that enquiry.
Where the catalogue lists them under this group they appear in the table; otherwise they sit in the hydraulic group, and we will point you to the right page.
They can — several control configurations existed on the Kobelco SK200-10. The serial number plus the affected function confirms the correct parts.
Control Levers
View Parts ListControl Box Assembly
View Parts ListControl Box Assembly
View Parts ListPedal Assembly (1 Pedal)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.