Kobelco SK240-12 · Upper Frame Electric Assembly · 28 part numbers
No illustration for this section
The Upper Frame Electric Assembly is listed without an exploded view in the SK240-12 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK240-12 Upper Frame Electric Assembly — 28 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN03E00093F1 | ELEC ASSY, UPP | ||
| 2 | LP13E01085P1 | CABLE | 1 |
| 3 | YN13E02426P1 | CABLE | 1 |
| 4 | LC53S00001D1 | HORN | 1 |
| 5 | LC53S00001D2 | HORN | 1 |
| 6 | HX85A00003DX | TRIM | 1 |
| 7 | YN03E01304P1 | BRACKET | 1 |
| 8 | 2427P1836D25 | STRIP, WEATHER | 1 |
| 9 | YN03E01278P2 | BRACKET | 1 |
| 10 | ZS16C03012 | CAPSCREW | 2 |
| 11 | LS03E01052P1 | RUBBER | 1 |
| 12 | PY01P01043D3 | CLIP | 1 |
| 14 | ZW26X03000 | LOCK WASHER | 4 |
| 15 | YF24S00001P1 | RELAY | 1 |
| 16 | YF24S00002P1 | RELAY | 1 |
| 17 | ZW16P08000 | WASHER | 2 |
| 19 | ZM73C06016 | SEMS BOLT - | 2 |
| 21 | ZM73C08020 | SEMS BOLT - | 10 |
| 22 | YN50S00062P1 | SWITCH | 1 |
| 23 | YN50S00058P1 | SWITCH, LIMIT | 1 |
| 24 | YN53S00007D1 | BUZZER | 1 |
| 25 | 2432Z451 | CATCH | 1 |
| 26 | ZS16C03018 | CAPSCREW | 2 |
| 27 | ZS18C06016 | CAPSCREW | 1 |
| 28 | ZN18C06005 | NUT | 1 |
| 29 | ZN18C08007 | NUT | 2 |
| 31 | ZM61C04016 | SEMS BOLT - | 2 |
| 32 | YN03E01302P1 | RUBBER | 1 |
Kobelco SK240-12 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Structurally, these 28 numbers fall into 19 Kobelco number series — YN03E, LC53S, ZS16C among the largest. The list is weighted toward repeated items such as capscrew, sems, bolt and 11 hardware positions.
If you are quoting from this group, start with: ZM73C08020 (sems bolt -, ×10 per assembly); ZW26X03000 (lock washer, ×4 per assembly); ZS16C03012 (capscrew, ×2 per assembly). The full list follows below.
Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.
Monitor and controller items vary by machine build, so the serial number matters more in this group than in most. Send it with the fault description and we confirm the correct variant before quoting.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue. The practical first number to ask for in this group is ZM73C08020.
Yes — the harness is listed alongside its individual components, so you can replace a section or the complete assembly from the same table.
Send us the part number or a photo. Our coverage runs to 100,000+ part numbers available to order — this page lists one group, not the whole machine.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting (Mechatro Main Controller)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK240-12 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.