Kobelco SK240-12 · Wiring Harness (Display Control) · 8 part numbers
No illustration for this section
The Wiring Harness (Display Control) is listed without an exploded view in the SK240-12 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
8 separately orderable part numbers make up the Wiring Harness (Display Control) on the Kobelco SK240-12. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK240-12 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LS11E00115F1 | HARNESS ASSY | ||
| 1 | LS11E01186P1 | HARNESS | 1 |
| 1 | LS11E01186P2 | HARNESS | 1 |
| 2 | PY01P01043D3 | CLIP | 23 |
| 3 | YN13E01375P1 | CLIP | 7 |
| 4 | YT11E01043P1 | CLIP | 1 |
| 5 | YN54S01009P1 | CABLE | 1 |
| 6 | YY11E01263P1 | CABLE | 1 |
Part numbers as fitted to the Kobelco SK240-12 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 8 part numbers spread across 6 number series (LS11E, PY01P, YN13E being the biggest) Expect repeated items such as harness, clip, cable and 3 hardware positions when you work through it.
The high-quantity positions are: PY01P01043D3 (clip, ×23 per assembly); YN13E01375P1 (clip, ×7 per assembly); LS11E01186P1 (harness, ×1 per assembly). The full list follows below.
Connector and terminal items in this group are the small parts that end most wiring repairs. They are inexpensive, so they are worth adding to any order as spares for the same machine.
Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.
By part number — the catalogue lists harness sections as complete numbered items, and that is how we quote them. If that matches your case, quote PY01P01043D3 and we will take it from there.
Both are available. For sensors and switches we usually recommend genuine through original supply channels; the quotation states the condition of every line item either way.
Yes — relays, fuses and terminals are listed individually and are commonly ordered in small quantities as machine spares.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting (Mechatro Main Controller)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK240-12 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.