Kobelco SK240-12 · Wiring Harness (Right-Side Camera, Upper Frame) · 8 part numbers

Illustration reproduced from the Kobelco SK240-12 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
Below is the complete Kobelco SK240-12 Wiring Harness (Right-Side Camera, Upper Frame) — 8 part numbers with the quantity fitted per assembly. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN11E00302F1 | HARNESS ASSY | ||
| 1 | YN55E01151P1 | CABLE | 1 |
| 3 | YN11E01549P1 | PLATE | 1 |
| 4 | HX80X07040DX | TUBE | 1 |
| 5 | YN13E01375P1 | CLIP | 5 |
| 6 | PY01P01043D3 | CLIP | 24 |
| 7 | ZM73C08020 | SEMS BOLT - | 3 |
| 8 | YN11E01551P1 | PLATE | 1 |
Listed for the Kobelco SK240-12 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Structurally, these 8 numbers fall into 6 Kobelco number series — YN11E, YN55E, HX80X among the largest. The list is weighted toward repeated items such as plate, clip, harness and 3 hardware positions.
Three numbers worth noting first: PY01P01043D3 (clip, ×24 per assembly); YN13E01375P1 (clip, ×5 per assembly); ZM73C08020 (sems bolt -, ×3 per assembly). The full list follows below.
The Wiring Harness (Right-Side Camera, Upper Frame) group on the Kobelco SK240-12 contains 8 separately orderable part numbers. The full list with quantities per assembly is in the table below.
Send the Kobelco SK240-12 serial number with the fault description. Machine-side electrical changed across the production run on some variants, and the serial number confirms the correct part before you order.
Both are available. For sensors and switches we usually recommend genuine through original supply channels; the quotation states the condition of every line item either way. On the Kobelco SK240-12, that usually comes back to PY01P01043D3 (clip) in this group.
Yes — relays, fuses and terminals are listed individually and are commonly ordered in small quantities as machine spares.
The part number from the failed sensor is fastest; failing that, the machine serial number plus the fault description lets us confirm it from the catalogue.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting (Mechatro Main Controller)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK240-12 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.