Kobelco SK250-8 · Fuel System · 58 part numbers
No illustration for this section
The Fuel System is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK250-8 Fuel System breaks down into 58 individually orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| . | FUEL SYSTEM | ||
| 11195 | VH111951180A | CLAMP,NOZZLE HOLDER | 4 |
| 11334 | VH11334E0020 | HOLDER,INJECTION PUMP | 1 |
| 11491A | VH114912470A | BRACKET,INJ. PUMP | 1 |
| 13505 | VH135052581A | GEAR SUB ASSY,IDLE | 1 |
| 13572 | VH135721320A | PLATE,IDLE GEAR THRUST | 1 |
| 13581 | VH135811751A | SHAFT,IDLE GEAR | 1 |
| 13603 | VH136031190A | GEAR SUB ASSY,IN PUMP DRIVE | 1 |
| 15771 | VH15771E0010 | PIPE,OIL,NO.1 | 1 |
| 16337 | VH16337E0010 | STAY,WATER OUTLET | 1 |
| 21191 | VH211911221A | PULSER | 1 |
| 21576 | VH21576E0020 | CLIP | 4 |
| 21576A | VH21576E0010 | CLIP | 2 |
| 22512 | VH225122090A | COVER,TIMER | 1 |
| 22730 | VH227301351A | PUMP ASSY,COMMON-RAIL | 1 |
| 22760 | VH227601261A | COMMON-RAIL ASSY | 1 |
| 22825 | VH228252570A | NUT | 1 |
| 22835 | VH228351570A | BOLT,JOINT | 4 |
| 23081 | VH230812650A | PIPE SUB ASSY,NOZZLE | 1 |
| 23711 | VH237112670A | PIPE,INJ,NO.1 | 1 |
| 23712 | VH237122640A | PIPE,INJ,NO.2 | 1 |
| 23713 | VH237132570A | PIPE,INJ,NO.3 | 1 |
| 23714 | VH237142590A | PIPE,INJ,NO.4 | 1 |
| 23783 | VH237832710A | PIPE,FUEL | 1 |
| 23783A | VH237832480A | PIPE,FUEL | 1 |
| 23809 | VH238092070A | BRACKET SUB ASSY,FUEL PIPE | 1 |
| 23816 | VH23816E0080A | PIPE,FUEL,NO.4 | 1 |
| 23816A | VH23816E0100 | PIPE,FUEL,NO.4 | 1 |
| 23816B | VH23816E0090 | PIPE,FUEL,NO.4 | 1 |
| 23910 | VH239101440A | INJECTOR ASSY,COMMON-RAIL | 4 |
| 79904A | VH799041021A | CLIP SUB ASSY | 4 |
| 82121 | VH82121E0610 | WIRE,ENGINE | 4 |
| 900115 | VH900115214A | GASKET | 4 |
| 900124 | VH900124510A | BOLT | 1 |
| 900124 A | VH900124600A | BOLT | 4 |
| 900125 | VH900125101A | BOLT | 1 |
| 9019A | VH901908316A | BOLT | 2 |
| 9029A | VH902910193A | BOLT | 2 |
| 9029B | VH902912180A | BOLT | 1 |
| 9068- 08160 | VH906808160A | BOLT,FLANGE | 2 |
| 9068- 08250 | VH906808250A | BOLT,FLANGE | 4 |
| 9068- 08300 | VH906808300A | BOLT,FLANGE | 1 |
| 9068- 08320 | VH906808320A | BOLT,FLANGE | 2 |
| 9068- 08350 | VH906808350A | BOLT,FLANGE | 3 |
| 9068- 08400 | VH906808400A | BOLT,FLANGE | 3 |
| 9068- 08550 | VH906808550A | BOLT,FLANGE | 2 |
| 9068- 08850 | VH906808850A | BOLT,FLANGE | 1 |
| 9240- 08087 | VH924008087A | NUT | 4 |
| 9321- 08350 | VH932108350A | STUD | 1 |
| 9504- 03140 | VH950403140A | PIN,STRAIGHT | 1 |
| 9600- 08070 | VH960008070A | PLUG | 1 |
| 9645A | VH964504935A | O-RING | 1 |
| 9659A | VH965908104A | WASHER,SOFT | 1 |
| 9659B | VH965910119A | WASHER,SOFT | 4 |
| 9659C | VH965908120A | WASHER,SOFT | 4 |
| 9659D | VH965908119A | WASHER,SOFT | 2 |
| 9659E | VH965912111A | WASHER,SOFT | 2 |
| 9851A | VH985101197A | O-RING | 2 |
Factory part numbers as fitted to the Kobelco SK250-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
The 58 entries group into 29 distinct number series, led by VH906, VH237. Expect repeated items such as bolt, pipe, flange and 26 hardware positions when you work through it.
Where to start in this table: VH111951180A (clamp,nozzle holder, ×4 per assembly); VH21576E0020 (clip, ×4 per assembly); VH228351570A (bolt,joint, ×4 per assembly). The full list follows below.
Send the Kobelco SK250-8 serial number with the engine number from the nameplate. Both together let us confirm the correct parts for your build before quoting, since several components changed across the production run.
The Kobelco SK250-8 is powered by a Hino diesel, and this group covers the machine-side components around it — the parts that carry Kobelco part numbers rather than engine-only numbers. Where an engine-mounted item also carries an engine maker's cross-reference, it appears in the table alongside.
Both are useful — the machine serial confirms the build and the engine nameplate number confirms engine-mounted items. Send both and we match them. In this group, VH111951180A is the number most often quoted for that enquiry.
Blocked cores, failed hoses or clips, a worn water pump or a tired thermostat are the usual causes. The cooling components in this group are all separately orderable so the repair can be scoped precisely.
Yes — from small gaskets to complete assemblies, consolidated into one shipment where possible, by air, sea or express courier to 30+ countries.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListRadiator Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.