Kobelco SK250-8 Grip Assembly — Exploded View & Part Numbers

Kobelco SK250-8 · Grip Assembly · 13 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK250-8

Grip Assembly

The Grip Assembly group on the Kobelco SK250-8 contains 13 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 13 part numbers in this group, all listed below
• Kobelco SK250-8 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Structurally, these 13 numbers fall into 4 Kobelco number series — YN03M, ZS31C, YN50E among the largest. Expect repeated items such as grip, lever, machine and 2 hardware positions when you work through it.

Where to start in this table: YN03M01498P1 (boot, ×2 per assembly); YN03M01328P2 (plate, ×2 per assembly); ZN18C14011 (nut, ×2 per assembly). The full list follows below.

The parts in this group rarely fail on their own, but they are replaced alongside the components that do — which is why they are listed separately here, ready to be added to any repair order.

Where this section carries no illustration, the parts table below is the authoritative list. Every entry is a real Kobelco part number — nothing on this page is generic or approximated.