Kobelco SK250-8 · Hyd Lines,Arm 2.98M · 32 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
Below is the complete Kobelco SK250-8 Hyd Lines,Arm 2.98M — 32 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| . | HYD LINES,ARM 2.98M | ||
| LQ12B00542F1 | CYLINDER INSTAL | ||
| 0 | LQ01V00030F2 | CYLINDER ASSY,BUCKET | 1 |
| LQ12B00543F1 | CYLINDER INSTAL | ||
| A1 | LQ12B01570P1 | PIN | 1 |
| A2 | HS18C16150G2 | CAPSCREW | 1 |
| A3 | ZN18C16013 | NUT | 2 |
| A4 | YN12B01122D1 | SHIM (0.5) | 1 |
| A5 | YN12B01122D2 | SHIM (0.9) | 1 |
| A6 | YN12B01122D3 | SHIM (1.6) | 1 |
| A7 | YN12B01601D1 | SHIM (2.0) | 2 |
| LQ43H00093F1 | HYD LINES,CYLINDER | ||
| B1 | LQ43H01258P1 | TUBE | 1 |
| B2 | LQ43H01259P1 | BAND | 1 |
| B3 | LQ43H01260P1 | BAND | 1 |
| B4 | YN43H01097P1 | CLAMP | 1 |
| B5 | ZG91V02000 | NIPPLE,GREASE | 1 |
| B6 | ZG91S02000 | NIPPLE,GREASE | 1 |
| B7 | ZD12P02600 | O-RING | 1 |
| B8 | ZD12A01800 | O-RING | 1 |
| B9 | ZS18C10030 | CAPSCREW | 2 |
| B10 | ZS18C10055 | CAPSCREW | 1 |
| B11 | ZS28C10030 | CAPSCREW | 4 |
| B12 | ZW26X10000 | LOCK WASHER | 2 |
| B13 | ZW16H10000 | WASHER | 1 |
| LQ43H00095F1 | HYD LINES,ARM | ||
| C1 | ZX50H12140 | HOSE | 1 |
| C2 | LQ43H01264D1 | HOSE | 1 |
| C3 | ZE13X16000 | CLAMP,HALF | 2 |
| C4 | ZS28C12040 | CAPSCREW | 4 |
| C5 | ZD12P03400 | O-RING | 1 |
| C6 | ZW26K12000 | LOCK WASHER | 4 |
Kobelco SK250-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK260LC-8 and the later SK250-10 generation are confirmed from your model plate before quoting.
Structurally, these 32 numbers fall into 18 Kobelco number series — LQ43H, YN12B, LQ12B among the largest. In practice that means repeated items such as capscrew, cylinder, shim and 9 hardware positions.
If you are quoting from this group, start with: ZS28C10030 (capscrew, ×4 per assembly); ZS28C12040 (capscrew, ×4 per assembly); ZW26K12000 (lock washer, ×4 per assembly). The full list follows below.
Swing, travel and implement circuits share the same pump flow on the Kobelco SK250-8, which is why a fault in one function can point back to a component listed in this group. A pressure test narrows the circuit down; the drawing then narrows it to a part number.
Working from the exploded view is the fastest way to order. Find the component on the drawing, note its callout number, and take the matching reference from the table — that mapping removes the guesswork that comes with describing a part over the phone or in an email.
The machine serial number, the part number if you have it, and the symptom. With those three, fitment is confirmed and the quotation follows the same working day. The practical first number to ask for in this group is ZS28C10030.
Yes. Seal items are listed as individual part numbers in the table, so a seal package for one joint can be quoted without buying the whole assembly.
Either. The complete Hyd Lines,Arm 2.98M can be quoted as a set, or any single part number from the table — both are normal requests from our trade customers.
Tank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListHyd Lines,Pump (Suction Deliverty)
View Parts ListHyd Lines,Upp (Main)
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.