Kobelco SK250-8 Hyd Lines,Boom 6.02M (19Ft 9In) — Exploded View & Part Numbers

Kobelco SK250-8 · Hyd Lines,Boom 6.02M (19Ft 9In) · 65 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK250-8

Hyd Lines,Boom 6.02M (19Ft 9In)

Every part number in the Kobelco SK250-8 Hyd Lines,Boom 6.02M (19Ft 9In) is listed here — 65 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK250-8 catalogue for this machine family.

• 65 part numbers in this group, all listed below
• Kobelco SK250-8 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

The 65 entries group into 19 distinct number series, led by LQ42H, YN42H. Expect repeated items such as hyd, lines, tube and 10 hardware positions when you work through it.

If you are quoting from this group, start with: ZM73C12035 (sems-bolt, ×16 per assembly); PV02B01073D3 (cap, ×12 per assembly); ZS28C12040 (capscrew, ×8 per assembly). The full list follows below.

Send us the Kobelco SK250-8 serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.

Hydraulic components are the heart of the Kobelco SK250-8: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.