Kobelco SK250-8 · Valve Assembly,Pilot (Propelling) · 13 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
This page lists all 13 part numbers in the Kobelco SK250-8 Valve Assembly,Pilot (Propelling). Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN30V00105F1 | VALVE ASSY,PILOT | ||
| . | (PROPELLING) | ||
| 1 | YN30V00105S005 | COVER | 2 |
| 11 | YN30V00105S010 | SPOOL | 4 |
| YN30V00105R100 | REPAIR KIT | 1 | |
| YN30V00105R110 | REPAIR KIT | 1 | |
| YN30V00105R120 | REPAIR KIT | 1 | |
| YN30V00105R130 | REPAIR KIT | 1 | |
| YN30V00105R140 | REPAIR KIT | 1 | |
| YN30V00105R150 | REPAIR KIT | 1 | |
| YN30V00105R160 | REPAIR KIT | 1 | |
| YN30V00105R170 | REPAIR KIT | 1 | |
| YN30V00105R180 | REPAIR KIT | 1 |
Listed for the Kobelco SK250-8 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Read as a dataset, the 13 part numbers spread across 1 number series (YN30V being the biggest) The list is weighted toward repeated items such as repair, kit, valve.
Three numbers worth noting first: YN30V00105S010 (spool, ×4 per assembly); YN30V00105S005 (cover, ×2 per assembly); YN30V00105R100 (repair kit, ×1 per assembly). The full list follows below.
For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.
Rebuild-at-component-level is the practical route for most Kobelco SK250-8 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.
Either. The complete Valve Assembly,Pilot (Propelling) can be quoted as a set, or any single part number from the table — both are normal requests from our trade customers. On the Kobelco SK250-8, that usually comes back to YN30V00105S010 (spool) in this group.
In most cases yes. The wear points on Kobelco SK250-8 hydraulic assemblies are individually replaceable and all carry their own part numbers in the table above, so a targeted repair can be quoted without exchanging the complete unit.
Stocked items leave within one to two working days. Anything that needs ordering through supply channels is quoted with a lead time upfront, and mixed orders are consolidated for dispatch to 30+ countries.
Tank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListHyd Lines,Pump (Suction Deliverty)
View Parts ListHyd Lines,Upp (Main)
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.