Kobelco SK330-8 Control Lines,Main — Exploded View & Part Numbers

Kobelco SK330-8 · Control Lines,Main · 26 part numbers

Illustration reproduced from the Kobelco SK330-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK330-8

Control Lines,Main

26 separately orderable part numbers make up the Control Lines,Main on the Kobelco SK330-8. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.

• 26 part numbers in this group, all listed below
• Kobelco SK330-8 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 26 part numbers spread across 13 number series (2420R, 2444Z, ZH22X being the biggest) In practice that means repeated items such as hose, connector, elbow and 1 hardware positions.

Where to start in this table: ZH22X06000 (connector, ×7 per assembly); ZH32X06000 (elbow, ×5 per assembly); ZH22X04000 (connector, ×3 per assembly). The full list follows below.

Lever feel is restored by replacing pins, bushings and springs at the worn joints — all listed individually here, so the repair is scoped by feel and measurement rather than by guesswork.

Control-line and linkage items are mostly compact hardware, which makes them inexpensive to consolidate into an existing order — a set of pins, bushings and rods travels in the same parcel as anything else you are buying.