Kobelco SK330-8 · Lever Assembly,Propel · 11 part numbers
No illustration for this section
The Lever Assembly,Propel is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK330-8 Lever Assembly,Propel breaks down into 11 individually orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN50M00013F1 | LEVER ASSY,PROPEL | ||
| A1 | YN50M01045P1 | LEVER | 1 |
| A2 | YN50M01046P1 | LEVER | 1 |
| A3 | YN03M01040P1 | GRIP | 2 |
| A4 | 2420Z1232 | NUT | 2 |
| A5 | YN55M01011P1 | PEDAL | 1 |
| A6 | YN55M01010P1 | PEDAL | 1 |
| A7 | ZM73C10020 | SEMS-BOLT | 4 |
| A8 | ZM22C08025 | SEMS-BOLT | 4 |
| YN55M00003F1 | PEDAL ASSY | ||
| B1 | YN26M00064P1 | MAT,FLOOR | 1 |
Part numbers as fitted to the Kobelco SK330-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
The 11 entries group into 7 distinct number series, led by YN50M, YN55M. In practice that means repeated items such as lever, pedal, sems and 3 hardware positions.
The high-quantity positions are: ZM73C10020 (sems-bolt, ×4 per assembly); ZM22C08025 (sems-bolt, ×4 per assembly); YN03M01040P1 (grip, ×2 per assembly). The full list follows below.
The callout numbers on the exploded view map to the Ref. column in the table. Where this section has no illustration, the parts table is the authoritative list.
Lever feel is restored by replacing pins, bushings and springs at the worn joints — all listed individually here, so the repair is scoped by feel and measurement rather than by guesswork.
They can — several control configurations existed on the Kobelco SK330-8. The serial number plus the affected function confirms the correct parts. If that matches your case, quote ZM73C10020 and we will take it from there.
Standard hand tools cover most of this group. We ship parts, not labour notes, but our team can point out which joints to check for wear while the linkage is apart.
Play in levers and linkages usually traces to worn pins and bushings in this group. Each position carries its own part number, so only the worn ones need ordering.
Controls,Operators
View Parts ListControl Box Assy
View Parts ListControl Lines,Remote
View Parts ListControl Lines,Main
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.