Kobelco SK330-8 · Harness Assembly,Engine · 16 part numbers
No illustration for this section
The Harness Assembly,Engine is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK330-8 Harness Assembly,Engine is listed here — 16 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC16E00010F1 | HARNESS ASSY,ENGINE | ||
| 1 | LC16E01029P2 | HARNESS | 1 |
| 5 | ZM73C08020 | SEMS-BOLT | 4 |
| 6 | ZW16P06000 | WASHER | 1 |
| 15 | YN13E01365P1 | PLATE | 1 |
| 19 | LC16E01026P1 | BRACKET | 1 |
| 20 | LC16E01028P1 | HARNESS | 1 |
| 23 | PY01P01043D4 | CLIP | 3 |
| 26 | LC16E01030P1 | PLATE | 1 |
| 27 | ZW16P08000 | WASHER | 2 |
| 28 | ZW26X08000 | LOCK WASHER | 1 |
| 29 | EW02E01016D3 | CLIP | 1 |
| 31 | EW02E01015D2 | CLIP | 4 |
| 32 | ZY26X04050 | SPACER | 1 |
| 33 | ZS18C08065 | CAPSCREW | 1 |
| 37 | ZM73C10020 | SEMS-BOLT | 1 |
Listed for the Kobelco SK330-8 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 16 entries group into 9 distinct number series, led by LC16E, ZM73C. Expect repeated items such as harness, washer, clip and 9 hardware positions when you work through it.
Three numbers worth noting first: ZM73C08020 (sems-bolt, ×4 per assembly); EW02E01015D2 (clip, ×4 per assembly); PY01P01043D4 (clip, ×3 per assembly). The full list follows below.
Send the Kobelco SK330-8 serial number with the fault description. Machine-side electrical changed across the production run on some variants, and the serial number confirms the correct part before you order.
Electrical faults on the Kobelco SK330-8 — a gauge that will not read, a machine that will not crank, a harness rub-through — are diagnosed by circuit, and the fix usually comes down to one part number from this group rather than a complete rewire.
Intermittent faults still end at a part number — send the symptom pattern and the serial, and we will suggest the positions in this group most often responsible. On the Kobelco SK330-8, that usually comes back to ZM73C08020 (sems-bolt) in this group.
Cranking-but-no-start traces through the fuel shut-off, sensors and relays in this group. Send the symptoms and serial number and we will indicate the likely part numbers.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue.
Gauge Assy,Cluster
View Parts ListController Instal
View Parts ListRelay Box Assy
View Parts ListBattery Assy
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.