Kobelco SK330-8 · Harness Assembly,Upp (Plate,Floor) · 10 part numbers
No illustration for this section
The Harness Assembly,Upp (Plate,Floor) is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
10 separately orderable part numbers make up the Harness Assembly,Upp (Plate,Floor) on the Kobelco SK330-8. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC13E00032F1 | HARNESS ASSY,UPP | ||
| 1 | YN13E01449P3 | HARNESS | 1 |
| 2 | PY01P01043D3 | CLIP | 35 |
| 3 | YN13E01375P1 | CLIP | 14 |
| 4 | LC13E01186P1 | HARNESS | 1 |
| 5 | ZW26X08000 | LOCK WASHER | 1 |
| 6 | ZN18C08007 | NUT | 1 |
| 7 | PY01P01043D8 | CLIP | 3 |
| 9 | LE13E01005P1 | CABLE | 1 |
| 10 | ZW16P08000 | WASHER | 1 |
Factory part numbers as fitted to the Kobelco SK330-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 10 part numbers spread across 7 number series (LC13E, YN13E, PY01P being the biggest) The list is weighted toward repeated items such as harness, clip, washer and 6 hardware positions.
Where to start in this table: PY01P01043D3 (clip, ×35 per assembly); YN13E01375P1 (clip, ×14 per assembly); PY01P01043D8 (clip, ×3 per assembly). The full list follows below.
Connector and terminal items in this group are the small parts that end most wiring repairs. They are inexpensive, so they are worth adding to any order as spares for the same machine.
Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.
Cranking-but-no-start traces through the fuel shut-off, sensors and relays in this group. Send the symptoms and serial number and we will indicate the likely part numbers. In this group, PY01P01043D3 is the number most often quoted for that enquiry.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue.
Yes — the harness is listed alongside its individual components, so you can replace a section or the complete assembly from the same table.
Gauge Assy,Cluster
View Parts ListController Instal
View Parts ListRelay Box Assy
View Parts ListBattery Assy
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.