Kobelco SK250-8 Arm Group,2.98M (9Ft 9In) — Exploded View & Part Numbers

Kobelco SK250-8 · Arm Group,2.98M (9Ft 9In) · 44 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK250-8

Arm Group,2.98M (9Ft 9In)

This page lists all 44 part numbers in the Kobelco SK250-8 Arm Group,2.98M (9Ft 9In). Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 44 part numbers in this group, all listed below
• Kobelco SK250-8 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 44 part numbers spread across 11 number series (LQ12B, YN12B, B16T being the biggest) In practice that means repeated items such as shim, arm, pin and 7 hardware positions.

Three numbers worth noting first: ZG91S02000 (nipple,grease, ×5 per assembly); ZN18C16013 (nut, ×4 per assembly); 2445R220D4 (seal,dust, ×4 per assembly). The full list follows below.

Structural groups rarely fail as castings; what wears is everything pinned, bolted and clamped to them. That is what makes this group the practical one to work from — pins, bushings, retaining hardware and the mounting points that take the working load every cycle of the machine.

Structural repairs are usually planned against measured wear rather than a fixed interval. Pins and bushings are the items to measure first; the retaining hardware in this group is cheap to replace at the same time and is worth adding to the same shipment.