Kobelco SK250-8 · Fuel Lines · 33 part numbers
No illustration for this section
The Fuel Lines is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK250-8 Fuel Lines is listed here — 33 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ21P00008F1 | FUEL LINES | ||
| 5 | YN21P01036F1 | FILTER ASSY,FUEL | 1 |
| 6 | LQ21P01010P1 | HOSE | 1 |
| 7 | HX11F06270DY | HOSE | 1 |
| 8 | HX11F06018DX | HOSE | 1 |
| 9 | HX11Y06024DX | HOSE | 1 |
| 10 | HX11Y06028DX | HOSE | 1 |
| 11 | HX81X19170DX | TUBE | 1 |
| 14 | PH05P01088D7 | CLIP | 8 |
| 15 | PY01P01043D2 | CLIP | 8 |
| 16 | PH05P01088D6 | CLIP | 2 |
| 17 | ZM73C10030 | SEMS-BOLT | 2 |
| 18 | ZS18C10040 | CAPSCREW | 2 |
| 19 | ZW16P10000 | WASHER | 2 |
| 20 | HX11F06052DX | HOSE | 1 |
| 21 | HX11F06270DX | HOSE | 1 |
| 22 | HX81X19040DX | TUBE | 1 |
| 23 | HX81X19260DX | TUBE | 2 |
| 24 | ZM73C10020 | SEMS-BOLT | 2 |
| 25 | PY01P01043D3 | CLIP | 2 |
| 26 | ZC46X16011 | CLIP | 2 |
| 27 | ZC16X01800 | CLIP | 2 |
| 28 | YN25V00004P1 | VALVE,STOP | 1 |
| 29 | YN21P01056P1 | TUBE | 1 |
| 30 | YN21P01057P1 | BOLT,EYE | 1 |
| 31 | YN21P01058P1 | PACKING | 2 |
| ENGINE PARTS No. | |||
| 1 | VH233002800A | FILTER ASSY | 1 |
| 1-1 | YN30T01002P1 | FILTER ELEMENT | 1 |
| (VH23390E0010) | FUEL E/G | ||
| 2 | VH237811620A | PIPE FUEL | 2 |
| 3 | VHSZ91024430 | BOLT | 2 |
| 4 | VHSZ43014003 | WASHER SOFT | 4 |
Kobelco SK250-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK260LC-8 and the later SK250-10 generation are confirmed from your model plate before quoting.
The 33 entries group into 18 distinct number series, led by YN21P, HX11F. In practice that means repeated items such as hose, clip, fuel and 13 hardware positions.
If you are quoting from this group, start with: PH05P01088D7 (clip, ×8 per assembly); PY01P01043D2 (clip, ×8 per assembly); VHSZ43014003 (washer soft, ×4 per assembly). The full list follows below.
Send the Kobelco SK250-8 serial number with the engine number from the nameplate. Both together let us confirm the correct parts for your build before quoting, since several components changed across the production run.
The Kobelco SK250-8 is powered by a Hino diesel, and this group covers the machine-side components around it — the parts that carry Kobelco part numbers rather than engine-only numbers. Where an engine-mounted item also carries an engine maker's cross-reference, it appears in the table alongside.
Loss of power under load, blue or black exhaust smoke, and oil at the compressor outlet are the usual reports. Send the symptom and we will indicate the relevant part numbers. The practical first number to ask for in this group is PH05P01088D7.
Yes for engine-maker cross-referenced items — the cross-references in the table let us quote from the engine nameplate number directly.
Send the machine serial number and the engine number from the nameplate. Several components changed across the production run, and both numbers together confirm the correct set.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListRadiator Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.