Kobelco SK250-8 · Guard Installation — Group 2 · 23 part numbers
No illustration for this section
The Guard Installation — Group 2 is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
This page lists all 23 part numbers in the Kobelco SK250-8 Guard Installation — Group 2. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ21C00043F1 | GUARD INSTAL | ||
| 1 | LQ22C00018F1 | BONNET ASSY | 1 |
| 1-1 | LQ22C01167P1 | BONNET | 1 |
| 1-1J | LC22C01028P1 | HINGE | 2 |
| 1-1K | ZS11C12030 | CAPSCREW | 4 |
| 1-2 | YN22C01177P1 | INSULATION | 1 |
| 1-3 | YN22C01182P1 | INSULATION | 2 |
| 1-4 | YN22C01297P1 | INSULATION | 2 |
| 1-5 | YN22C01283D4 | STRIP,WEATHER | 1 |
| 1-6 | YR21C01251D5 | STRIP,WEATHER | 1 |
| 1-7 | 2406Z304 | HANDLE | 1 |
| 1-8 | LC22C01154P1 | RUBBER | 2 |
| 1-9 | ZS18C08025 | CAPSCREW | 4 |
| 1-10 | 2418T23178 | WASHER | 4 |
| 1-11 | YN22C01287P1 | PLATE | 1 |
| 1-12 | ZM73C08020 | SEMS-BOLT | 4 |
| 2 | LC21C01811P1 | CATCH | 1 |
| 3 | LC21C01812P1 | CATCH | 1 |
| 4 | ZN18C08007 | NUT | 4 |
| 5 | ZW16H08000 | WASHER | 4 |
| 7 | ZN18C12010 | NUT | 4 |
| 8 | 2418T10357 | WASHER | 4 |
| 9 | YN21C03749P1 | SHIM | 2 |
Kobelco SK250-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK260LC-8 and the later SK250-10 generation are confirmed from your model plate before quoting.
Read as a dataset, the 23 part numbers spread across 14 number series (YN22C, LQ22C, LC22C being the biggest) In practice that means repeated items such as insulation, washer, bonnet and 8 hardware positions.
If you are quoting from this group, start with: ZS11C12030 (capscrew, ×4 per assembly); ZS18C08025 (capscrew, ×4 per assembly); 2418T23178 (washer, ×4 per assembly). The full list follows below.
As with every group we ship, each item is declared by condition — genuine via original supply channels, or a quality OEM alternative — on the quotation itself. Nothing is left to the invoice.
The Guard Installation — Group 2 group on the Kobelco SK250-8 contains 23 separately orderable part numbers — one of the largest single groups on the machine. Every number is listed in the table below with its quantity per assembly.
Water ingress usually traces to a perished weather seal or a worn latch that no longer pulls the door tight. Find the seal and latch callouts on the drawing and take those numbers from the table; a photo helps us confirm. The practical first number to ask for in this group is ZS11C12030.
Yes. Send the serial number and we will list every seal in the group into one quotation, consolidated into a single shipment.
They can, by build specification. The serial number identifies the build, and we confirm the panel numbers against it before quoting.
Cab Instal
View Parts ListCab Assy
View Parts ListWindow Assy,Roof
View Parts ListWindow Assy,Front
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.