Kobelco SK250-8 · Lever Assembly,Propel · 12 part numbers
No illustration for this section
The Lever Assembly,Propel is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK250-8 Lever Assembly,Propel — 12 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| . | LEVER ASSY,PROPEL | ||
| YN50M00013F1 | LEVER ASSY,PROPEL | ||
| A1 | YN50M01045P1 | LEVER | 1 |
| A2 | YN50M01046P1 | LEVER | 1 |
| A3 | YN03M01040P1 | GRIP | 2 |
| A4 | 2420Z1232 | NUT | 2 |
| A5 | YN55M01011P1 | PEDAL | 1 |
| A6 | YN55M01010P1 | PEDAL | 1 |
| A7 | ZM73C10020 | SEMS-BOLT | 4 |
| A8 | ZM22C08025 | SEMS-BOLT | 4 |
| YN55M00003F1 | PEDAL ASSY | ||
| B1 | YN26M00064P1 | MAT,FLOOR | 1 |
Kobelco SK250-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK260LC-8 and the later SK250-10 generation are confirmed from your model plate before quoting.
Structurally, these 12 numbers fall into 7 Kobelco number series — YN50M, YN55M, YN03M among the largest. In practice that means repeated items such as lever, pedal, propel and 3 hardware positions.
If you are quoting from this group, start with: ZM73C10020 (sems-bolt, ×4 per assembly); ZM22C08025 (sems-bolt, ×4 per assembly); YN03M01040P1 (grip, ×2 per assembly). The full list follows below.
The Lever Assembly,Propel group on the Kobelco SK250-8 contains 12 separately orderable part numbers. The table below lists every one with its quantity per assembly, from the machine's own parts catalogue.
Send the Kobelco SK250-8 serial number with your enquiry, and tell us which function feels wrong — that plus the serial confirms the correct parts from the table before you order.
Where the catalogue lists them under this group they appear in the table; otherwise they sit in the hydraulic group, and we will point you to the right page. The practical first number to ask for in this group is ZM73C10020.
They can — several control configurations existed on the Kobelco SK250-8. The serial number plus the affected function confirms the correct parts.
Standard hand tools cover most of this group. We ship parts, not labour notes, but our team can point out which joints to check for wear while the linkage is apart.
Controls,Operators
View Parts ListControl Box Assy
View Parts ListControl Lines,Remote
View Parts ListControl Lines,Main
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.