Kobelco SK330-8 · Camshaft And Idle Gear · 18 part numbers
No illustration for this section
The Camshaft And Idle Gear is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK330-8 Camshaft And Idle Gear breaks down into 18 individually orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| 13501 | VH135011620B | CAMSHAFT SUB ASSY | 1 |
| 13505 | VH135052302A | GEAR SUB ASSY,IDLE | 1 |
| 13505A | VH135052292A | GEAR SUB ASSY,IDLE | 1 |
| 13505B | VH135052521B | GEAR SUB ASSY,IDLE | 1 |
| 13520 | VH135201100A | GEAR ASSY,CAMSHAFT | 1 |
| 13572 | VH135721250B | PLATE,IDLE GEAR THRUST | 1 |
| 13572A | VH135721230A | PLATE,IDLE GEAR THRUST | 1 |
| 13572B | VH135721271A | PLATE,IDLE GEAR THRUST | 1 |
| 13581 | VH135811711A | SHAFT,IDLE GEAR | 1 |
| 13581A | VH135811530B | SHAFT,IDLE GEAR | 1 |
| 13581B | VH135811440D | SHAFT,IDLE GEAR | 1 |
| 900124 | VH900124503A | BOLT | 1 |
| 900124 A | VH900124502A | BOLT | 2 |
| 900125 | VH900125101A | BOLT | 1 |
| 9509A | VH950906123A | PIN | 1 |
| 9509B | VH950906124A | PIN | 1 |
| 9867A | VH986750134A | BUSHING | 1 |
| 9867B | VH986757106A | BUSHING | 1 |
Part numbers as fitted to the Kobelco SK330-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
The 18 entries group into 4 distinct number series, led by VH135, VH900. In practice that means repeated items such as gear, idle, sub and 3 hardware positions.
The high-quantity positions are: VH900124502A (bolt, ×2 per assembly); VH135011620B (camshaft sub assy, ×1 per assembly); VH135052302A (gear sub assy,idle, ×1 per assembly). The full list follows below.
Working from the exploded view keeps ordering precise: find the component on the drawing, note the callout number, and match it to the Ref. column in the table. Where no illustration exists for this section, the parts table below is the authoritative list.
Cooling-system items in this group are the usual first suspects for overheating under load. Cores, hoses, clamps and the water-side hardware are all separately orderable, which keeps a cooling repair proportionate to the fault.
Both. Assemblies are listed alongside their internal components, so a targeted repair and a full exchange are quoted from the same table. If that matches your case, quote VH900124502A and we will take it from there.
Always. Genuine via original supply channels or quality OEM alternative is stated on the quotation for every line item.
Yes. The parts in this group carry Kobelco part numbers; where an engine maker's cross-reference exists it is listed alongside, and we can quote against either number.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListRadiator Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.