Kobelco SK330-8 · Control Lines,Propel · 24 part numbers
No illustration for this section
The Control Lines,Propel is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
This page lists all 24 part numbers in the Kobelco SK330-8 Control Lines,Propel. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC62H00014F1 | CONTROL LINES,PROPEL | ||
| A1 | YN30V00105F1 | VALVE ASSY,PILOT | 1 |
| A2 | 2420R349D085 | HOSE | 2 |
| A3 | 2420R349D155 | HOSE | 2 |
| A4 | 2420R349D370 | HOSE | 1 |
| A5 | 2420R349D390 | HOSE | 1 |
| A6 | HH25X04004G2 | CONNECTOR | 1 |
| A7 | ZH22X04006 | CONNECTOR | 1 |
| A8 | ZH32X04006 | ELBOW | 4 |
| A9 | YX52S00013P1 | SENSOR,PRESS (L.P.) | 2 |
| A9-2 | ZD12P01100 | O-RING | 1 |
| A12 | YN62H01015P1 | RUBBER | 4 |
| A14 | HM83C10030G1 | SEMS-BOLT | 4 |
| A15 | YN13E01375P1 | CLIP | 1 |
| A16 | PY01P01043D8 | CLIP | 1 |
| LC64H00087F1 | CONTROL LINES,BLOCK | ||
| B1 | YN64H01291P1 | BLOCK | 1 |
| B2 | 2420R349D135 | HOSE | 1 |
| B3 | 2420R349D140 | HOSE | 1 |
| B5 | YN64H01288P1 | CLAMP | 1 |
| B6 | ZM73C10020 | SEMS-BOLT | 2 |
| YN64H00183F1 | CONTROL LINES,BLOCK | ||
| C1 | YN64H01336P1 | BLOCK | 1 |
| C2 | ZM73C08020 | SEMS-BOLT | 3 |
Kobelco SK330-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK350LC-8 and the later SK330-9 generation are confirmed from your model plate before quoting.
Read as a dataset, the 24 part numbers spread across 15 number series (2420R, YN64H, ZM73C being the biggest) The list is weighted toward repeated items such as hose, block, control and 5 hardware positions.
If you are quoting from this group, start with: ZH32X04006 (elbow, ×4 per assembly); YN62H01015P1 (rubber, ×4 per assembly); HM83C10030G1 (sems-bolt, ×4 per assembly). The full list follows below.
Controls wear with use: levers develop play, linkages tighten up, and pilot circuits drift. Because each component in this group carries its own part number, worn positions can be replaced individually and the machine keeps its original feel.
Pilot and control-line items in this group carry hydraulic pressure, so their seals are service items rather than lifetime parts. Including fresh seals with any linkage order avoids a second stoppage later.
Yes. Every rod, pin, bushing and lever is listed individually in the table above. The practical first number to ask for in this group is ZH32X04006.
Pilot components that belong to the hydraulic group are listed on that group's page — search the part number or ask us and we will point you to it.
The pins, bushings and springs at the joints you can already feel — cheap lines in this group that save opening the console twice.
Controls,Operators
View Parts ListControl Box Assy
View Parts ListLever Assy,Propel
View Parts ListControl Lines,Remote
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.