Kobelco SK200-8 · Engine · 19 part numbers
No illustration for this section
The Engine is listed without an exploded view in the SK200-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Engine group on the Kobelco SK200-8 contains 19 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| U10-00 | CYLINDER HEAD | ||
| U11-00 | CYLINDER BLOCK | ||
| U11-10 | TEIMING GEAR COVER AND FLYWHEEL HOUSING | ||
| U12-00 | MAIN MOVING PARTS | ||
| U13-00 | CAMSHAFT AND IDLE GEAR | ||
| U13-10 | VALVE SYSTEM | ||
| U13-20 | INTAKE AND EXHAUST SYSTEM | ||
| U14-00 | LUBRICATION | ||
| U14-51 | OIL FILTER | ||
| U14-52 | OIL COOLER | ||
| U15-00 | FUEL SYSTEM | ||
| U15-54 | FUEL FILTER | ||
| U16-00 | COOLING SYSTEM | ||
| U18-10 | ELECTRICAL PARTS (ENGINE) | ||
| U18-30 | TURBOCHARGER | ||
| U18-40 | ENGINE ACCESSORY PARTS | ||
| U19-04 | ALTERNATOR | ||
| U19-05 | STARTING MOTOR | ||
| U19-91 | GASKET KIT |
Part numbers as fitted to the Kobelco SK200-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 19 numbers fall into 9 Kobelco number series — U13, U14, U18 among the largest. Expect repeated items such as system, parts, cylinder and 1 seal and O-ring positions when you work through it.
The high-quantity positions are: U10-00 (cylinder head); U11-00 (cylinder block); U11-10 (teiming gear cover and flywheel housing). The full list follows below.
The Engine group contains 19 separately orderable part numbers for the Kobelco SK200-8. The table below lists every number with its quantity per assembly, taken from the machine's own parts catalogue.
Send the Kobelco SK200-8 serial number with the engine number from the nameplate. Both together let us confirm the correct parts for your build before quoting, since several components changed across the production run.
Yes — from small gaskets to complete assemblies, consolidated into one shipment where possible, by air, sea or express courier to 30+ countries. If that matches your case, quote U10-00 and we will take it from there.
Elements, hoses and clamps head the list — the wear items in the cooling circuit — followed by complete cores when a leak has gone too far.
Yes. Gaskets, seals and O-rings all carry their own part numbers in the table, so a top-end gasket set can be quoted from the list.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.