Kobelco SK200-8 · Oil Cooler · 27 part numbers
No illustration for this section
The Oil Cooler is listed without an exploded view in the SK200-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
27 separately orderable part numbers make up the Oil Cooler on the Kobelco SK200-8. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| 15651 | VH156511780A | BOLT | 1 |
| 15661 | VH156611450A | SPRING,OIL VALVE | 1 |
| 15661A | VH156611510A | SPRING,OIL VALVE | 1 |
| 15662 | VH156621320A | PLUG,OIL VALVE | 1 |
| 15663 | VH156631120A | GASKET,OIL PLUG | 1 |
| 15675 | VH156751020A | VALVE,OIL RELIEF | 2 |
| 15701 | VH157012350A | CASE SUB ASSY,OIL COOLER | 1 |
| 15710 | VH15710E0030 | COOLER ASSY,OIL | 1 |
| 15712 | VH157121880A | ELEMENT,OIL COOLER | 1 |
| 15716 | VH157161100A | PLUG,VALVE SPG | 4 |
| 15716A | VH157161130A | PLUG,VALVE SPG | 1 |
| 15716B | VH157161150A | PLUG,VALVE SPG | 3 |
| 15717 | VH157171320A | GASKET,OIL COOLER ELEMENT | 2 |
| 15721 | VH157211170A | COVER,OIL COOLER | 1 |
| 15726 | VH157261110A | PLUG,BLIND | 2 |
| 900756 | VH900756246A | O-RING | 1 |
| 9201- 10080 | VH920110080A | NUT | 4 |
| 9260- 10180 | VH926010180A | WASHER,PLAIN | 4 |
| 9280- 10250 | VH928010250A | LOCK WASHER | 4 |
| 9644A | VH964402835A | O-RING | 2 |
| 9739A | VH973925105A | ELBOW | 2 |
| 9851A | VH985112112A | O-RING | 1 |
| 9851B | VH985118120A | O-RING | 2 |
| 9851C | VH985121118A | O-RING | 4 |
| 9851D | VH985120107A | O-RING | 3 |
| 9851E | VH985126103A | O-RING | 2 |
| S1572 | VHS157201590A | CASE ASSY,OIL COOLER | 1 |
Factory part numbers as fitted to the Kobelco SK200-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 27 part numbers spread across 10 number series (VH157, VH156, VH985 being the biggest) The list is weighted toward repeated items such as oil, valve, ring and 10 hardware positions.
Where to start in this table: VH157161100A (plug,valve spg, ×4 per assembly); VH920110080A (nut, ×4 per assembly); VH926010180A (washer,plain, ×4 per assembly). The full list follows below.
Cooling-system items in this group are the usual first suspects for overheating under load. Cores, hoses, clamps and the water-side hardware are all separately orderable, which keeps a cooling repair proportionate to the fault.
Cooling and fuel-system faults on the Kobelco SK200-8 usually show up as overheating under load, hard starting, or loss of power. Because each component in this group is separately orderable, the repair can be scoped to the parts actually involved instead of a wholesale exchange.
Yes. Gaskets, seals and O-rings all carry their own part numbers in the table, so a top-end gasket set can be quoted from the list. In this group, VH157161100A is the number most often quoted for that enquiry.
Hoses, clamps and caps are straightforward; cores and complete assemblies are heavier work. We supply the parts either way.
Both. Assemblies are listed alongside their internal components, so a targeted repair and a full exchange are quoted from the same table.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.