Kobelco SK200-8 · Hyd Lines,Boom 5.65M (18Ft 6In) · 61 part numbers
No illustration for this section
The Hyd Lines,Boom 5.65M (18Ft 6In) is listed without an exploded view in the SK200-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Hyd Lines,Boom 5.65M (18Ft 6In) group on the Kobelco SK200-8 contains 61 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN42H00328F1 | HYD LINES,BOOM | ||
| YN42H00311F1 | HYD LINES,BOOM | ||
| A1 | YN42H02569P1 | TUBE | 1 |
| A2 | YN42H02570P1 | TUBE | 1 |
| A3 | YN42H02571P1 | TUBE | 1 |
| A4 | YN42H02665P1 | TUBE | 1 |
| A5 | YN42H02573P1 | TUBE | 1 |
| A6 | YN42H02574P1 | TUBE | 1 |
| A7 | YN42H02348P1 | CLAMP | 4 |
| A8 | YN42H02349P1 | CLAMP | 2 |
| A9 | YN42H02351P1 | CLAMP | 4 |
| A10 | YN42H02353P1 | CLAMP | 2 |
| A11 | YN42H02355P1 | CLAMP | 2 |
| A12 | YN42H02357P1 | CLAMP | 2 |
| A13 | YN42H02319P1 | BUSHING | 4 |
| A14 | YN43H01524P1 | BUSHING | 5 |
| A15 | ZD12A01800 | O-RING | 4 |
| A16 | ZD12A02100 | O-RING | 4 |
| A17 | YY42H01313P1 | O-RING | 1 |
| A18 | ZM73C12035 | SEMS-BOLT | 16 |
| A19 | YN42H02363P1 | CLAMP | 2 |
| YN42H00293F1 | HYD LINES,BOOM | ||
| B4 | PV02B01073D3 | CAP | 12 |
| YN42H00330F1 | HYD LINES,CYLINDER | ||
| YN42H00298F1 | HYD LINES,CYLINDER | ||
| C1 | YN42H02341P1 | TUBE | 1 |
| C2 | ZX20H10072 | HOSE | 2 |
| C3 | ZX20H16078 | HOSE | 2 |
| C4 | YN42H02615P1 | BAND | 2 |
| C5 | YX42H01074P2 | BAND | 2 |
| C6 | YY42H01184P1 | CLAMP | 2 |
| C7 | ZH22Z04000 | CONNECTOR | 2 |
| C8 | ZG91S02000 | NIPPLE,GREASE | 2 |
| C9 | ZD12P02600 | O-RING | 1 |
| C10 | ZD12A01600 | O-RING | 1 |
| C11 | ZS18C10030 | CAPSCREW | 4 |
| C12 | ZS18C12065 | CAPSCREW | 2 |
| C13 | ZS28C10030 | CAPSCREW | 4 |
| C14 | ZW26X10000 | LOCK WASHER | 4 |
| C15 | ZW16H12000 | WASHER | 2 |
| YN42H00331F1 | HYD LINES,CYLINDER | ||
| D1 | YN42H02342P1 | TUBE | 1 |
| YN42H00332F1 | HYD LINES,CYLINDER | ||
| E1 | YN42H02616P1 | TUBE | 1 |
| E2 | YN42H02617P1 | TUBE | 1 |
| E3 | ZD12P03400 | O-RING | 2 |
| E5 | ZS28C12040 | CAPSCREW | 8 |
| YN42H00336F1 | HYD LINES,CYLINDER | ||
| YN42H00297F1 | HYD LINES,CYLINDER | ||
| F1 | ZX20H12115 | HOSE | 1 |
| F2 | YN42H02683D1 | HOSE | 1 |
| F3 | YN42H02628P1 | BAND | 1 |
| F4 | LC42H01750P1 | BAND | 1 |
| F5 | YN43H01097P1 | CLAMP | 1 |
| F6 | ZE13X20001 | CLAMP,HALF | 2 |
| F10 | ZS18C12055 | CAPSCREW | 1 |
| F12 | ZS28C14050 | CAPSCREW | 4 |
| F14 | ZD12P03800 | O-RING | 1 |
| F19 | ZW26K14000 | LOCK WASHER | 4 |
| YN42H00337F1 | HYD LINES,CYLINDER | ||
| G1 | YN42H02333P1 | TUBE | 1 |
Part numbers as fitted to the Kobelco SK200-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 61 numbers fall into 18 Kobelco number series — YN42H, ZD12A, ZX20H among the largest. The list is weighted toward repeated items such as tube, hyd, lines and 10 hardware positions.
The high-quantity positions are: ZM73C12035 (sems-bolt, ×16 per assembly); PV02B01073D3 (cap, ×12 per assembly); ZS28C12040 (capscrew, ×8 per assembly). The full list follows below.
The Hyd Lines,Boom 5.65M (18Ft 6In) group on the Kobelco SK200-8 contains 61 separately orderable part numbers, all listed in the table below with the quantity fitted per assembly. Every number in the table is a real Kobelco part number taken from the machine's own parts catalogue, not a generic cross-reference.
Send us the Kobelco SK200-8 serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.
Usually yes — the callout numbers on the drawing map directly to the Ref. column in the table. If your machine differs by serial range, send a photo of the part and we will confirm before quoting. If that matches your case, quote ZM73C12035 and we will take it from there.
Yes — send the serial and the part number together; where a position changed across the run we flag it and quote the number that matches your build.
Yes. Send the Kobelco SK200-8 serial number with the part number and we confirm the fit from the serial range. Where a component changed during the production run, we flag it before you commit.
Tank Instal,Hyd
View Parts ListTank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListValve Instal
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.