Kobelco SK200-8 · Motor Installation,Swing · 13 part numbers

Illustration reproduced from the Kobelco SK200-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
The Motor Installation,Swing group on the Kobelco SK200-8 contains 13 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. The list comes straight from the Kobelco SK200-8 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN32W00017F1 | MOTOR INSTAL,SWING | ||
| 1 | ZS13C20055 | CAPSCREW | 13 |
| 2 | PV02B01073D3 | CAP | 2 |
| 2 | YN64H01391D1 | CAP | 2 |
| 3 | YN32W01101D1 | GAUGE,LEVEL | 1 |
| 4 | YN32W01114D1 | TUBE | 1 |
| 5 | YN32W01075D1 | TUBE | 1 |
| 6 | ZE91T12000 | CAP | 1 |
| 7 | YN15V00036F1 | MOTOR ASSY,SWING | 1 |
| 7 | YN15V00036F2 | MOTOR ASSY,SWING | 1 |
| 7-1 | YN15V00035F1 | MOTOR ASSY,HYD | 1 |
| 7-2 | YN32W00019F1 | REDUCTION ASSY,SWING | 1 |
| 7-3 | YN32W00022F1 | REDUCTION ASSY,SWING | 1 |
Part numbers as fitted to the Kobelco SK200-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 13 numbers fall into 6 Kobelco number series — YN32W, YN15V, ZS13C among the largest. The list is weighted toward repeated items such as swing, motor, cap and 1 hardware positions.
The high-quantity positions are: ZS13C20055 (capscrew, ×13 per assembly); PV02B01073D3 (cap, ×2 per assembly); YN64H01391D1 (cap, ×2 per assembly). The full list follows below.
The Motor Installation,Swing group on the Kobelco SK200-8 contains 13 separately orderable part numbers, all listed in the table below with the quantity fitted per assembly. Every number in the table is a real Kobelco part number taken from the machine's own parts catalogue, not a generic cross-reference.
Send us the Kobelco SK200-8 serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.
Usually yes — the callout numbers on the drawing map directly to the Ref. column in the table. If your machine differs by serial range, send a photo of the part and we will confirm before quoting. If that matches your case, quote ZS13C20055 and we will take it from there.
Yes — send the serial and the part number together; where a position changed across the run we flag it and quote the number that matches your build.
Yes. Send the SK200-8 serial number with the part number and we confirm the fit from the serial range. Where a component changed during the production run, we flag it before you commit.
Tank Instal,Hyd
View Parts ListTank Instal,Hyd
View Parts ListValve Instal
View Parts ListHyd Lines,Pump
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.