Kobelco SK200-8 · Tank Installation,Hyd · 29 part numbers

Illustration reproduced from the Kobelco SK200-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
29 separately orderable part numbers make up the Tank Installation,Hyd on the Kobelco SK200-8. Where the drawing shows a callout, the Ref. column in the table carries the same number. The list comes straight from the Kobelco SK200-8 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN33H00070F1 | TANK INSTAL,HYD | ||
| YN33H00058F1 | TANK INSTAL,HYD | ||
| A1 | ZS13C16040 | CAPSCREW | 4 |
| A2 | ZW13H16000 | WASHER | 4 |
| A3 | LE33H01017D1 | SHIM (1.0) | 3 |
| YN33H00080F1 | TANK ASSY,HYD | ||
| B2 | YN50V00025F1 | STRAINER ASSY,SUCTION | 1 |
| B3 | YN57V00004F1 | BREATHER ASSY | 1 |
| B3-2 | YN57V00004S002 | ELEMENT,FILTER | 1 |
| B3-6 | 2446U260S10 | NUT | 1 |
| B3-8 | 2446U260S8 | PACKING | 1 |
| B4 | ZS28C06016 | CAPSCREW | 4 |
| B5 | ZW26K06000 | LOCK WASHER | 4 |
| B6 | YN52V01008F3 | ELEMENT,FILTER | 1 |
| B6-2 | YN52V01008S002 | PLATE | 1 |
| B6-3 | YN21V00015P1 | VALVE,CHECK | 1 |
| B6-4 | ZD11G09000 | O-RING | 1 |
| B6-5 | YN52V01008S005 | PACKING | 1 |
| B6-6 | LC33H01009P1 | SPRING | 1 |
| B6-7 | YN52V01011P1 | ELEMENT,FILTER | 2 |
| YN52V01008R600 | ELEMENT KIT | 1 | |
| YN33H00081F1 | TANK ASSY | ||
| C1 | YN33H00083P1 | TANK | 1 |
| C2 | YN33H01283P1 | COVER | 1 |
| C3 | YN33H01259P1 | COVER | 1 |
| C4 | ZD11G19000 | O-RING | 2 |
| C5 | ZM73C10025 | SEMS-BOLT | 12 |
| C6 | YN58S00009F1 | GAUGE ASSY,LEVEL | 1 |
| C7 | ZE72X08000 | PLUG | 1 |
Factory part numbers as fitted to the Kobelco SK200-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 29 part numbers spread across 16 number series (YN33H, YN52V, YN57V being the biggest) The list is weighted toward repeated items such as tank, element, hyd and 7 hardware positions.
Where to start in this table: ZM73C10025 (sems-bolt, ×12 per assembly); ZS13C16040 (capscrew, ×4 per assembly); ZW13H16000 (washer, ×4 per assembly). The full list follows below.
Every hydraulic item we quote is declared by condition: genuine, ordered through original supply channels, or a quality OEM alternative. The declaration appears on the quotation itself, never buried in an invoice, so you know exactly what you are fitting before you commit.
The Tank Installation,Hyd group on the Kobelco SK200-8 contains 29 separately orderable part numbers, all listed in the table below with the quantity fitted per assembly. Every number in the table is a real Kobelco part number taken from the machine's own parts catalogue, not a generic cross-reference.
Yes. Send the Kobelco SK200-8 serial number with the part number and we confirm the fit from the serial range. Where a component changed during the production run, we flag it before you commit. In this group, ZM73C10025 is the number most often quoted for that enquiry.
The machine serial number, the part number if you have it, and the symptom. With those three, fitment is confirmed and the quotation follows the same working day.
Yes. Seal items are listed as individual part numbers in the table, so a seal package for one joint can be quoted without buying the whole assembly.
Tank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListValve Instal
View Parts ListHyd Lines,Pump
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.