Kobelco SK200-8 · Valve Assembly,Pilot (Propelling) · 13 part numbers

Illustration reproduced from the Kobelco SK200-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
13 separately orderable part numbers make up the Valve Assembly,Pilot (Propelling) on the Kobelco SK200-8. Take the callout number from the drawing and match it in the Ref. column below. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN30V00105F1 | VALVE ASSY,PILOT | ||
| . | (PROPELLING) | ||
| 1 | YN30V00105S005 | COVER | 2 |
| 11 | YN30V00105S010 | SPOOL | 4 |
| YN30V00105R100 | REPAIR KIT | 1 | |
| YN30V00105R110 | REPAIR KIT | 1 | |
| YN30V00105R120 | REPAIR KIT | 1 | |
| YN30V00105R130 | REPAIR KIT | 1 | |
| YN30V00105R140 | REPAIR KIT | 1 | |
| YN30V00105R150 | REPAIR KIT | 1 | |
| YN30V00105R160 | REPAIR KIT | 1 | |
| YN30V00105R170 | REPAIR KIT | 1 | |
| YN30V00105R180 | REPAIR KIT | 1 |
Part numbers as fitted to the Kobelco SK200-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 13 part numbers spread across 1 number series (YN30V being the biggest) In practice that means repeated items such as repair, kit, valve.
The high-quantity positions are: YN30V00105S010 (spool, ×4 per assembly); YN30V00105S005 (cover, ×2 per assembly); YN30V00105R100 (repair kit, ×1 per assembly). The full list follows below.
For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.
Rebuild-at-component-level is the practical route for most Kobelco SK200-8 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.
It is the quantity fitted per assembly in the catalogue — useful when a job calls for more than one of the same part, such as O-rings fitted in a pack. If that matches your case, quote YN30V00105S010 and we will take it from there.
Both. Every quotation states the condition of each item — genuine through original supply channels, or a quality OEM alternative — so the choice is yours and it is documented.
We quote new components from this table — genuine or OEM by declaration — rather than exchange units, so you know exactly what is being fitted.
Tank Instal,Hyd
View Parts ListTank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListValve Instal
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.