Kobelco SK200-8 · Gauge Assembly,Cluster · 13 part numbers
No illustration for this section
The Gauge Assembly,Cluster is listed without an exploded view in the SK200-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-8 Gauge Assembly,Cluster — 13 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN59S00021F1 | GAUGE ASSY,CLUSTER | ||
| YN59S00021F2 | GAUGE ASSY,CLUSTER | ||
| YN59S00021F3 | GAUGE ASSY,CLUSTER | ||
| 1 | YN59S00021S001 | GAUGE | 1 |
| 2 | YN59S00021S002 | PRINTED BOARD | 1 |
| 3 | YN59S00021S003 | CASE | 1 |
| 4 | YN59S00021S004 | CASE | 1 |
| 5 | YN59S00021S005 | BUZZER | 1 |
| 6 | YN59S00021S006 | PANEL | 1 |
| 7 | YN59S00021S007 | SCREW | 6 |
| 8 | YN59S00021S008 | SCREW | 6 |
| 9 | YN59S00021S009 | SCREW | 2 |
| 10 | YN59S00021S010 | SCREW | 7 |
Kobelco SK200-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the neighbouring SK200-10 and SK210-8 generations are confirmed from your model plate before quoting.
Structurally, these 13 numbers fall into 1 Kobelco number series — YN59S among the largest. Expect repeated items such as gauge, screw, cluster and 4 hardware positions when you work through it.
If you are quoting from this group, start with: YN59S00021S010 (screw, ×7 per assembly); YN59S00021S007 (screw, ×6 per assembly); YN59S00021S008 (screw, ×6 per assembly). The full list follows below.
Electrical diagnosis on the Kobelco SK200-8 starts with the circuit, not the part — but once the circuit is isolated, the fix is usually a single item from this group: a sensor, a relay, a connector or a short harness section.
Each component carries its own Kobelco part number, from the assembly level down to individual connectors and relays. Working from the drawing callouts and the Ref. column keeps the diagnosis and the order aligned.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue. The practical first number to ask for in this group is YN59S00021S010.
Yes — the harness is listed alongside its individual components, so you can replace a section or the complete assembly from the same table.
Send us the part number or a photo. Our coverage runs to 100,000+ part numbers available to order — this page lists one group, not the whole machine.
Controller Instal
View Parts ListRelay Box Assy
View Parts ListBattery Assy
View Parts ListHarness Assy,Upp
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.