Kobelco SK200-8 · Relay Box Assembly · 16 part numbers
No illustration for this section
The Relay Box Assembly is listed without an exploded view in the SK200-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK200-8 Relay Box Assembly is listed here — 16 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN24E00016F1 | RELAY BOX ASSY | ||
| YN24E00016F2 | RELAY BOX ASSY | ||
| 1 | YN24E00016S001 | HOUSING | 1 |
| 2 | YN24E00016S002 | HOUSING | 1 |
| 3 | YN24E00016S003 | COVER | 1 |
| 4 | YN24E00016S004 | PRINTED BOARD | 1 |
| 5 | YN24E00016S005 | FUSE (5A) | 11 |
| 6 | YN24E00016S006 | FUSE (10A) | 9 |
| 7 | YN24E00016S007 | FUSE (15A) | 6 |
| 8 | YN24E00016S008 | FUSE (20A) | 10 |
| 9 | YN24S00010P1 | RELAY | 8 |
| 10 | YN24S00012P1 | RELAY | 4 |
| 11 | YN24E00016S011 | HANDLE | 1 |
| 12 | YN24E00016S012 | CONNECTOR | 1 |
| 13 | YN24E00016S013 | CONNECTOR | 3 |
| 14 | YN24S00012P2 | RELAY | 4 |
Listed for the Kobelco SK200-8 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 16 entries group into 2 distinct number series, led by YN24E, YN24S. Expect repeated items such as relay, fuse, box and 2 items fitted ten or more at a time when you work through it.
Three numbers worth noting first: YN24E00016S005 (fuse (5a), ×11 per assembly); YN24E00016S008 (fuse (20a), ×10 per assembly); YN24E00016S006 (fuse (10a), ×9 per assembly). The full list follows below.
Each component carries its own Kobelco part number, from the assembly level down to individual connectors and relays. Working from the drawing callouts and the Ref. column keeps the diagnosis and the order aligned.
Connector and terminal items in this group are the small parts that end most wiring repairs. They are inexpensive, so they are worth adding to any order as spares for the same machine.
Intermittent faults still end at a part number — send the symptom pattern and the serial, and we will suggest the positions in this group most often responsible. On the Kobelco SK200-8, that usually comes back to YN24E00016S005 (fuse (5a)) in this group.
Cranking-but-no-start traces through the fuel shut-off, sensors and relays in this group. Send the symptoms and serial number and we will indicate the likely part numbers.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue.
Gauge Assy,Cluster
View Parts ListController Instal
View Parts ListBattery Assy
View Parts ListHarness Assy,Upp
View Parts ListFilter List
View Parts ListCounterweight Instal
View Parts ListCounterweight Instal (Semi-Gain)
View Parts ListCounterweight Instal (Gain)
View Parts ListKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideKobelco SK200-8 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.